Pairing the headphones with a Bluetooth device

1.Switch the headphones on (> Switching the headphones on) and place them close to the Blue­tooth device (max. 20 cm).
Make sure that Bluetooth is activated (Bluetooth on/off switch is set to “I” and no audio cable is connected to the headphones).

2.Press and hold the voice assistant button for 4 seconds until you hear the voice prompt “Pairing”.

The LEDs flash white one after the other. The headphones are in pairing mode.

3.Activate Bluetooth on your Bluetooth device.

4.Via the menu of your Bluetooth device, start the search for new Bluetooth devices.

All active Bluetooth devices in the proximity of your Bluetooth device are displayed.

5.From the list of found Bluetooth devices, select “PXC 550-II”. If necessary, enter the default pin code “0000”.

If pairing was successful, you hear the voice prompts “Pairing successful” and “Device (1) connected”. The LED flashes white 3 times.

Bluetooth_koppeln.png 


 

If no connection is established within 5 minutes, pairing mode is terminated and the headphones switch to standby mode. If necessary, repeat the steps described above.


 

If you switch on the headphones for the first time (the pairing list is empty), they automatically switch to pairing mode.