Switching the headphones on

Caution_Ausrufezeichen.png 

 

Warning

Danger of hearing damage due to high volume levels!

Listening at high volume levels can lead to permanent hearing defects.

▷Before putting the headphones on, adjust the volume to a low level (> Adjusting the volume).

▷Do not continuously expose yourself to high volume levels.

1.Unfold the headphones.

2.Turn the ear cups outward until you hear a click in both ear cup joints.

The LED flashes white 3 times. If Bluetooth is activated on the headphones, you hear the voice prompts “Power on” and “Device (1) connected”.

If Bluetooth is deactivated on the headphones, you hear the voice prompt “Power on”. If necessary, connect the USB cable or the audio cable to the headphones.

Kopfhoerer_on.png 


 

Make sure that Bluetooth is already activated on your Blue­tooth device when switching on the headphones.


 

If Bluetooth is activated and the headphones cannot find a paired Bluetooth device within a few minutes, you hear the voice prompt “No device found”. The first LED of the LED dis­play flashes red. The headphones switch to standby mode.