Network connection via WiFi or Ethernet
Use the WiFi connection or the Ethernet connection for:
•QQMusic/QPLAY
•UPnP (Universal Plug and Play)
•Updates
The Soundbar must be on the same network as the devices the Soundbar wants to communicate with.
Establishing a WiFi connection via the Smart Control app
The WiFi connection can be established and managed via the Smart Control app (> Installing the Smart Control app).
▷In the device settings of the Smart Control app, tap “Network > WiFi” and connect the Soundbar to the desired WiFi.
Establishing a WiFi connection via WPS
To establish a WiFi connection via WPS (WiFi Protected Setup):
▷Press the SETUP button for approx. 2 seconds to activate WPS (WiFi Protected Setup).
The Soundbar searches for a connection.
The display shows “WPS searching” and the status LED flashes orange.
|
|
If no connection is established within 2 minutes, the search is terminated. |
▷Press the WPS button on your router.
The Soundbar connects to the WiFi.
The display shows “WiFi connected” for 4 seconds and the status LED lights up orange.
Establishing an Ethernet network connection
▷Make sure that the Ethernet cable is properly connected to the Soundbar and your network (> Connecting an Ethernet cable).
▷The Ethernet connection can be set up and managed via the Smart Control app.
|
|
If you connect the Soundbar to the Internet/Ethernet via cable, the WiFi function of the Soundbar is automatically deactivated. |