Pairing the headphones with a Bluetooth device

1.Switch the headphones on (> Switching the headphones on) and place them close to the Bluetooth device (max. 20 cm).

2.Press and hold the multi-function button for 2 seconds until you hear the voice prompt “Pairing”.

The LED flashes blue and red. The headphones are in pairing mode.

3.Activate Bluetooth on your Bluetooth device.

4.Via the menu of your Bluetooth device, start the search for new Bluetooth devices.

All active Bluetooth devices in the proximity of your Bluetooth device are displayed.

5.From the list of found Bluetooth devices, select “IE 80S BT”. If necessary, enter the default pin code “0000”.

If pairing was successful, you hear the voice prompts “Pairing successful” and “Device (1) connected”. The LED lights up blue for 3 seconds.   

Kopfhoerer_Koppeln.png 


 

If no connection is established within 3 minutes, pairing mode is terminated and the headphones switch to standby mode. If necessary, repeat the steps described above.


 

You can adjust and change the time interval when the head­phones switch to standby mode.

To be able to use this function, you require the Smart Control app (> Installing the Smart Control app).