Pairing the headphones with a Bluetooth device

1.Switch the headphones off and place them close to the Bluetooth device (max. 20 cm).

2.Press and hold the on/off button for 4 seconds.

The LED flashes red and blue. The headphones are in pairing mode.

3.Activate Bluetooth on your Bluetooth device.

4.Via the menu of your Bluetooth device, start the search for new Bluetooth devices.

All active Bluetooth devices in the proximity of your Bluetooth device are displayed.

5.From the list of found Bluetooth devices, select “HD 350BT”. If necessary, enter the default pin code “0000”.

6.If pairing was successful, you hear the voice prompt “Connected”. The LED flashes blue 3x.

Bluetooth_koppeln.png 


 

If no connection is established within 5 minutes, pairing mode is terminated and the headphones switch to standby mode. If necessary, repeat the steps described above.


 

If you switch on the headphones for the first time (the pairing list is empty), they automatically switch to pairing mode.