If you switch on the headphones for the first time (the pairing list is empty), they automatically switch to pairing mode. |
In order for you to pair the headphones with a Bluetooth device, the headphones have to be close to the Bluetooth device.
1.Press the multi-function button for 5 seconds.
The headphones switch to pairing mode. The LED flashes alternately white and red.
If the headphones were switched off, they will switch on first. In this case, you have to press and hold the multi-function button longer. |
2.Activate Bluetooth on your Bluetooth device.
3.Via the menu of your Bluetooth device, start the search for new Bluetooth devices.
All active Bluetooth devices in the proximity of your Bluetooth device are displayed.
By default, the name of the headphones is “ACCENTUM Plus”. You can individually adjust the name in the Smart Control app (> Installing the Smart Control app). |
4.From the list of found Bluetooth devices, select “ACCENTUM Plus”. If necessary, enter the default pin code “0000”.
5.If pairing was successful, you hear the voice prompts “Pairing successful” and “Connected” one after the other. The LED flashes white 3x.
If no connection is established within 2 minutes, pairing mode is terminated and the headphones switch to standby mode. If necessary, repeat the steps described above. |