Product overview
ACCENTUM
Model: ACAEBT
| Ear pads |
| Headband, steplessly adjustable |
| Ear cups |
| Speech microphones (2 pcs.) for phone calls |
| LED display |
| USB-C socket for charging, calling, streaming via PC/Mac |
| Volume + button |
| Music and voice control button |
| Volume - button |
| Main button •On/off button •Voice assistant button •Pairing button: pressing for 5 seconds activates the Bluetooth pairing mode |
| Marking for the right ear (R) and for the left ear (L) |
Microphones for the active noise cancellation ANC; |
Overview of the controls
Switch-on of the headphones
•Press the main button for 3 seconds
Overview of the LED display
During operation
LED | Meaning/headphones... | |
|---|---|---|
| white lights up for 5 seconds | ... switch on |
| white flashes 3x | ... are connected to a device via Bluetooth |
| white-red flashes | ... are in Bluetooth pairing mode |
| red flashes 3x | ... switch off |
During phone calls
LED | Meaning | |
|---|---|---|
| white flashes 10x repeatedly | Incoming call |
During charging
LED | Meaning | |
|---|---|---|
| flashes red | Battery charge is 0 % to 20 %. |
| flashes yellow | Battery charge is 20 % to 90 %. |
| flashes green | Battery charge is 90 % to 100 %. |
lights up green for 5 minutes | When the rechargeable battery is 100% charged, the LED lights up for 5 minutes and then goes off. | |
If the LED display does not light up: •Clean the charging socket (> Care and maintenance). •Charge the rechargeable battery until the LED display lights up again (at least 30 minutes) (> Charging the headphones’ rechargeable battery). If the rechargeable battery is completely discharged, it may take several minutes for the LED display to indicate the charging process. |
Overview of sound signals and voice prompts
The headphones output voice prompts and sound signals in case of various events.
Via the Smart Control app, you can adjust settings for the voice prompts and sound signals (> Setting the voice prompts/sound signals). |
Voice prompt | Meaning/headphones... |
|---|---|
Establishing a Bluetooth connection | |
“Connected” | ...are connected via Bluetooth. |
“No connection” | ... have lost the Bluetooth connection to a paired device. |
“Pairing successful” | ... have successfully completed Bluetooth pairing. |
“Pairing failed” | ... have not successfully completed Bluetooth pairing. |
Information on battery status and volume | |
“Recharge headset” | ... has an empty rechargeable battery. Charge the rechargeable battery (> Charging the headphones’ rechargeable battery). |
“More than xx % battery left” | ... indicates the remaining battery charge in percent. |
“Volume min” | ... has reached the minimum volume setting. |
“Volume max” | ... has reached the maximum volume setting. |
“Mute on” | ... mutes the microphone. |
“Mute off” | ... activates the microphone again. |
You hear short sound signals when the headphones
•are switched on or off,
•are in pairing mode (melody),
•detect devices in the pairing list,
•cancel the pairing process,
•receive commands via one of the buttons (increasing the volume, starting/pausing music playback, accepting/holding/rejecting calls, adjusting the ANC function or Transparency Mode),
•receive an incoming call (ring tone).